In either horizontal or vertical orientation, the EUROSLOT grille provides an original structure projecting lighting and shading effects

CONSTRUCTION
By selecting differing profile wire depths, we can either moderate or accentuate shading effects. Profiles 220, 300 and 560 provide a good compromise between shading efficiency and low weight of the grille .

The support rods give the grille its rigidity, 10x2, 13x2 or 15x2 rods with spacings of 25 or 50mm are most commonly specified.

DIMENSIONS & SHAPING
Dimensions of panels can be adapted to the under structure with the maximum recommended dimension at 2000 x 3000mm. Larger elements are also possible so please contact us (we suggest you consider transport and handling of larger grilles).
Panels can be flat or curved in either direction (two dimensionally).

FRAMING & FIXING DEVICES
Possibilities include:
- Perimeter framing
- Fixing plates
- Plugs and spigots
- Tenons
- Axles
- Inserts
Solutions are always to suit the under structure.

FINISH MESH
Most common is the natural finish (satin).